Customizing The Settings - Thermo Scientific Sorvall MTX 150 Instruction Manual

2
the start time for RTC.
Therefore, cannot call the program memory unit after setting RTC.
4. To stop this micro-ultracentrifuge in RTC operation, press the STOP button. The system then
stops RTC and stops the rotor.

Customizing the settings

You can customize the settings on the Run screen and the settings on the CUSTOM screen such as the
stop signal, sound volume and backlight.
Press the Customize icon on the MENU screen. Then the CUSTOM screen showing the five
functions is displayed as shown in Fig. 2-12.
Figure 2-12. CUSTOM screen
The functions of each icon on the CUSTOM screen are described in the table below.
Function
Zoom
Stop signal
Volume
Brightness
Vacuum
Standby
Setting
2-58 Sorvall MTX 150
Tab of each screen
Icon Description
The display on the Run screen can be zoomed in (see
the settings" on page 2-58 (1)).
The rotor stop signal can be selected from six kinds of sound
including five tunes and electric beep (see
on page 2-58 (2)).
The volume of the stop signal can be adjusted (see
settings" on page 2-58 (3)).
The brightness of the screen can be adjusted (see
settings" on page 2-58 (4)).
The conditions of the waiting for the vacuum of the rotor acceleration
state can be specified (see "Customizing the settings"
(5)).
"Customizing
"Customizing the settings"
"Customizing the
"Customizing the
on page 2-58
Thermo Scientific