Thermo Scientific Sorvall MTX 150 Instruction Manual page 26

2
The next page describes how to set run condition by citing some examples.
Note
1. If you enter the wrong value, press the CE button and then enter the correct value.
If you have pressed the Enter button, repeat step (1) of the previous page, and then enter the
correct value.
2. When setting the two or more of three run conditions (SPEED, TIME, and TEMP), you do not
have to press the Enter button after each setting. You can store the setting by pressing the desired
item.
3. If the system is running in (HOLD) and you want to set it to shut down at a future time, enter a
new time setting while the instrument is in operation; enter the sum of the time elapsed plus the
time remaining. If, for example, this machine has run continuously for five hours and you want to
stop it one and a half hours later, press the TIME column, then enter
6
• How to set speed, running time, temperature, and other parameters
Here are some examples and descriptions:
2-8 Sorvall MTX 150
:
3 0
Thermo Scientific