Thermo Scientific Sorvall MTX 150 Instruction Manual page 78

2
Figure 2-14. Stop signal Setting screen
3. Volume Adjustment
• The sound volume is turned up as the green range in the volume setting indicator increases. The
stop signal does not sound if there is only the black range. Adjust the sound volume by pressing the
following buttons.
< The volume is lowered by pressing this button.
> The volume is turned up by pressing this button.
The stop signal does not sound by pressing this button
The stop signal sounds at full volume by pressing this button
• Press the x button or the CUSTOM screen tab to store the setting.
4. Backlight setting
• The backlight brightens up as the green range in the backlight setting indicator increases. The
backlight level is darkest if there is only the black range. Press the following buttons to adjust the
brightness of the screen. Press the x button or the CUSTOM screen tab to store the setting.
< The brightness is decreased by pressing this button.
> The brightness is increased by pressing this button.
2-60 Sorvall MTX 150
The volume of the stop signal can be adjusted.
The brightness of the screen can be adjusted.
Thermo Scientific