Table of Contents
Advertisement
Process
Touch panel operation
8
Press the Run button in the PROGRAM
screen.
9
Run the micro-ultracentrifuge under normal
operation without changing to the run
parameters.
1. Step display
The PROGRAM button indicator displays steps as follows:
STEP:2-3
STEP:1-3
In this case, this program contains three steps.
In the Run screen, the run parameters for the first step in this program are displayed.
When the system finishes separating step 1 and moves to step 2,
STEP:2-3
STEP:2-3
Thermo Scientific
Screen display and notice
Run button
Program name
• Run the micro-ultracentrifuge according to
page
2-11.
• If you change to a run parameters (such as SPEED or TIME) after calling a
program, the program you have just called is canceled. You must call it again
to use it.
• Pressing the START button rotates the rotor under the run parameters of
STEP 1.
• When STEP 1 ends, the system moves to STEP 2 and STEP 3 automatically.
• The Run screen
appears.
"Operational procedure"
on
Sorvall MTX 150
2
2-37
Advertisement
Table of Contents
