Thermo Scientific Sorvall MTX 150 Instruction Manual page 71

(2) Deleting a registered roto
Process Touch panel operation
1 Press the Rotor Management icon on the
MENU screen.
2 Press the column of the rotor which you want
to delete on the Rotor Management screen.
Then check that the pressed column turns
blue and press the Delete rotor button.
3 Press the Yes button on the deletion
confirmation box.
Spin-down operation
While you press this button and are holding down it, the micro-ultracentrifuge accelerates up to the set
speed at the maximum acceleration rate. When you release this button, it starts deceleration. This feature
is useful to remove the adhered samples on the interior walls of the tubes.
Thermo Scientific
Screen display and notice
NO registered rotor
2
• The Rotor
Management screen
appears.
• The deletion
confirmation box is
displayed.
• The registered rotor
is deleted.
Sorvall MTX 150 2-53