Thermo Scientific Sorvall MTX 150 Instruction Manual page 50

2
Process Touch panel operation
2 Press the column of the program No. for
which you want to create (or change) a
program, and make sure that the pressed
column turns blue.
Then press the Select button.
3 Enter a program name as follows:
a) Press the column of the program name in
the PROGRAM screen.
b) Enter the program name in the Program
name screen.
c) Press the Enter button.
2-32 Sorvall MTX 150
Screen display and notice
• If a Program name and Parameter are displayed in the column of a Program
No., run parameters have already been stored for that program.
• If you want to create a new program, press a column that does not display
a Program name or Parameter.
If you want to store the
run parameters as
Program No.4., press
the column of the
Program No.4.
Select button
• The PROGRAM
screen appears.
Program name
column
User name
column
Rotor column
a) The Program name
screen appears.
b) If you enter the
"DNA-STEP", these
characters are
displayed on the
column of the program
name.
c) The PROGRAM screen
reappears.
Thermo Scientific