Table of Contents
Advertisement
2
The Sorvall MTX 150 micro-ultracentrifuge is capable of operation in more than one mode to meet a
wide range of applications. The outline of each available mode is given below:
Normal operation
Programmed operation
Step-mode operation
RCF (centrifugal force)
value display setting
Spin-down operation
RTC (real-time control)
operation
2-2
Sorvall MTX 150
Brief Description
You can store set run conditions in memory for later use in
repeated operation.
Store
Time
More than one normal operation can be combined into a sequence
of operations or step for successive centrifugation.
This feature calculates centrifugal force (RCF) values from set
speed. It can also calculate reversely, i.e., finding speed from such
values
.
Spin-down operation is useful to remove the adhered samples on
the interior walls of the tubes.
Run starts or completes at a required date and time.
Press START
button
Time
Call
Progr No.
Time
Time
Time
A finish date
and time re-
quired
Time
Reference
"Basic operation"
on
page 2-5
"Programmed operation"
on
page 2-16
"Step-mode operation"
on
page 2-30
"Displaying and setting RCF"
page 2-41
"Spin-down operation"
on
page 2-53
"RTC (real-time control)
operation"
on
page 2-1
Thermo Scientific
on
Advertisement
Table of Contents
