sezione / section
H 5
B
A
1
B
4
3
2
C
9
D
E
3
LOCK
F
A
G
H
L
M
N
P
18
Mototelaio
Frame
Ricomposizione
B
10
cavalletto laterale
6
Infilare la stampella laterale (5),
7
opportunamente ingrassata, nella
piastra (10) e fissarla con il perno (2)
interponendo la boccola (4).
Serrare il perno alla coppia prescritta
(Sez. C 3).
8
Posizionare le molle (7) e (8) di ritorno
cavalletto, fissandole sul perno della
piastra (10) e sulla stampella (5).
5
Posizionare l'interruttore (3) sulla
piastra, in appoggio sul perno (B).
Montare la vite (1) di fissaggio e
bloccarla alla coppia prescritta
(Sez. C 3).
Rimontaggio cavalletto
laterale
Posizionare la piastra (10) sostegno
cavalletto sul telaio e montare le
10
due viti (9) applicando frenafiletti
prescritto.
Serrare le viti (9) alla coppia prescritta
(Sez. C 3).
Collegare il connettore (A)
dell'interruttore cavalletto laterale al
cablaggio principale del veicolo.
Rimontare la carena sinistra
(Sez. E 2).
Reassembly of the
sidestand
Grease the sidestand leg (5) and fit it
to the bracket (10). Secure it with
pivot bolt (2), interposing the bush (4).
Tighten the pivot bolt to the specified
torque (Sect. C 3).
Locate the sidestand return springs (7)
and (8), and attach them to the pivot
bolt on the bracket (10) and to the
sidestand leg (5).
Locate the switch (3) on the bracket
against the pivot bolt (B).
Fit the retaining screw (1) and tighten
to the specified torque (Sect. C 3).
Refitting the sidestand
Locate the plate (10) on the frame,
apply the recommended threadlocker
to the two screws (9).
Tighten the screws (9) to the
specified torque (Sect. C 3).
Connect the sidestand switch
connector (A) to the main wiring
harness.
Refit the left-hand side fairing
(Sect. E 2).
749R
- M.Y. 2006 - edizione/edition 00