Figure 3-116 Lamp Calibration - Activating The Crossing - Siemens GCP5000 Instruction & Installation Manual

DISPLAY MODULE AND OFFICE CONFIGURATION EDITOR
_________________________________________________________________________________________________________
The next screen shows the deactivation of SSCC 1 and the completion of the calibration.
Figure 3-115 Lamp Calibration – Deactivating SSCC 1
The next activation type is Activating the Crossing. Select the Activating the Crossing button
and click on the Next button to continue.
Figure 3-116 Lamp Calibration – Activating the Crossing
3-73
SIG-00-22-02 JUNE 2022 (Revised September 2022)
Version: B.1