Figure 6-2 Selecting Receiver To Be Calibrated; Figure 6-3 Start Calibration - Siemens GCP5000 Instruction & Installation Manual

GCP5000 (GCE) INSTALLATION, CALIBRATION AND SYSTEM OPERATIONAL CHECK
__________________________________________________________________________________________
2. Select the receiver to calibrate by pressing 1 or 2 on the keypad.
3. To start the calibration press the 1 Key.
SIG-00-22-02
Version: B.1

Figure 6-2 Selecting Receiver to be Calibrated

Figure 6-3 Start Calibration

6-4
JUNE 2022 (Revised September 2022)