Figure 3-55 Dhcp Configuration; Figure 3-56 Select Software Updates; Figure 3-57 Select Cpu-Iii Update - Siemens GCP5000 Instruction & Installation Manual

_________________________________________________________________________________________________________
5. Select Client if Display is configured as Server.
6. From the USB menu, select 3) Software Updates > 3) CPU-III Update
7. Verify that the Ethernet cable is well seated on both ends, then press any key.
8. Select 1) Change CP MEF.
SIG-00-22-02
Version: B.1
DISPLAY MODULE AND OFFICE CONFIGURATION EDITOR

Figure 3-55 DHCP Configuration

Figure 3-56 Select Software Updates

Figure 3-57 Select CPU-III Update

3-39
JUNE 2022 (Revised September 2022)