Table of Contents
Advertisement
Name Input
RWP n (n=1..4)
Emergency Activate
Maint Call Rpt IP
SIG-00-22-02
Version : B.1
Condition for Input to be Available
Switch Inputs Used = Yes
Emergency Activate IP = Yes
Maint Call Rpt I/O Used = Yes
Found on Menu
Logic Programming/
Logic: Features
Logic Programming/
Logic: Features
Logic Programming/
Logic: Features
9-19
JUNE 2022 (Revised September 2022)
I/O FUNCTIONS AND ASSIGNMENTS
Description
This is a general-purpose input
state that can be monitored by the
system and used in the internal
logic. It is intended for monitoring
the reverse contact of a switch
circuit controller, however, it is not
restricted to this and can be used
for any type of input that is required
to be used in the logic
This input can be used to put the
system into a safe state with the
crossing activated and all output
de-energized.
This input can be used to cause the
maintenance call output to turn off
based
on some external inputs.
Advertisement
Chapters
Table of Contents
