Table of Contents
Advertisement
DISPLAY MODULE AND OFFICE CONFIGURATION EDITOR
_________________________________________________________________________________________________________
The Name column indicates the function the digital input is being used for and is the name used
in SEAR IIi event log entries when the digital input changes state. If the GCP programming has
already assigned an input or output function for this channel, the Web UI will show this channel
as pre-assigned and show the function assigned in the GCP programming in the Name column,
as shown in Figure 3-135. When the GCP programming has assigned the input or output, the
corresponding SEAR digital input algorithm is automatically selected as a Discrete input and
most properties associated with the preassigned input are locked, as shown. The debounce
times are still editable.
Figure 3-135 Digital Inputs GCP Assigned Vital I/O
3-87
SIG-00-22-02
JUNE 2022 (Revised September 2022)
Version: B.1
Advertisement
Chapters
Table of Contents
