Ordering Information; Table 1-9 Gcp5000 (Gce) Pso Module System Specifications - Siemens GCP5000 Instruction & Installation Manual

OVERVIEW
_________________________________________________________________________________________________________

Table 1-9 GCP5000 (GCE) PSO Module System Specifications

PARAMETER
Frequency Stability:
Modulation
Receiver Selectivity
Track Circuit Shunt
Track Transmitter Load
Track Receiver Load
Relay Coil Resistance
Input Power Supply
1.6

Ordering Information

The following page has the ordering information for the GCP5000 (GCE).
SIG-00-22-02
Version: B.1
RANGE OF VALUES
±0.01% (Hz) of the selected frequency
Frequency Modulation with an 8-bit serial address
Minimum 60 dB down on adjacent channels
Typical values are between 0.06 ohm and 0.5 ohm
sensitivity, other values are application dependent
25 Ohm
250 Ohm
400 to 1,000 Ohms
9.0 VDC to 16.5 VDC, 12.0 VDC nominal (via GCE
case)
1-10
JUNE 2022 (Revised September 2022)