Table 8-14 Sscc Iiii Module User Interface - Siemens GCP5000 Instruction & Installation Manual

_________________________________________________________________________________________________________
Table 8-14 describes the SSCC IIIi user interface.
Component
IN 1 LED
IN 2 LED
IN 3 LED
IN 4 LED
IN 5/GP LED
L1 LED
L2 LED
BELL LED
GC LED
FLASH SYNC LED
HEALTH LED
POWER LED
DIAG
Diagnostic Serial Port
SIG-00-22-02
Version: B.1

Table 8-14 SSCC IIIi Module User Interface

Function
Lights red when crossing input to 1 is energized.
Lights red when crossing input to 2 is energized.
Lights red when crossing input to 3 is energized.
Lights red when crossing input to 4 is energized.
Lights red when crossing input to 5 is energized.
Lights red when Lamp Output L1 is on.
Lights red when Lamp Output L2 is on.
Lights red when bell output is on.
Lights red when gate control (GC) output is energized.
Flashes red when sync pulse is present at FLASH SYNC
input/output.
Lights yellow. Flashes approximately 1 pulse per second when a
module is fully operational, 2 pulses per second when a module is
not communicating with the CPU, and approximately 4 pulses per
second when a fault is detected within the module.
Lights green to indicate that power is applied to the SSCC IIIi
module.
9-pin diagnostic serial port for the SSCC IIIi module.
8-29
DETAILED CASE AND MODULE DESCRIPTION
JUNE 2022 (Revised September 2022)