Figure 3-157 Sear Serial Ports: User Port; Figure 3-158 Web Ui Display Programming - Siemens GCP5000 Instruction & Installation Manual

_________________________________________________________________________________________________________
3.5.2.10 Set to Default
Used to set the SEAR configuration back to default.
3.5.2.11 Display Programming
SIG-00-22-02
Version: B.1

Figure 3-157 SEAR Serial Ports: User Port

Figure 3-158 Web UI Display Programming

3-109
DISPLAY MODULE AND OFFICE CONFIGURATION EDITOR
JUNE 2022 (Revised September 2022)