Figure 3-161 Display Programming: Port 1 Ethernet Port; Figure 3-162 Display Programming: Port 2 Ethernet Port - Siemens GCP5000 Instruction & Installation Manual

_________________________________________________________________________________________________________
Ethernet Port 1:
This menu allows the user to select options for Ethernet port 1. The user can choose between
Disabled and DHCP Client mode. When Disabled, the port has the fixed IP address as default
as shown below. The screen also allows the user to check the status of the connection.
This port would typically be used when connecting the GCP5000 to a cell modem for remote
monitoring.

Figure 3-161 Display Programming: Port 1 Ethernet Port

Ethernet Port 2:
This menu allows the user to select options for Ethernet port 2. The user can choose between
Disabled and DHCP Client mode. When Disabled, the port has the fixed IP address as default
as shown in Figure 3-162.

Figure 3-162 Display Programming: Port 2 Ethernet Port

SIG-00-22-02
Version: B.1
DISPLAY MODULE AND OFFICE CONFIGURATION EDITOR
3-111
JUNE 2022 (Revised September 2022)