Figure 3-89 Unsecure Connection Warning; Figure 3-90 Webui Login Screen - Siemens GCP5000 Instruction & Installation Manual

DISPLAY MODULE AND OFFICE CONFIGURATION EDITOR
_________________________________________________________________________________________________________

Figure 3-89 Unsecure Connection Warning

The display WebUI will then appear. Select the username "Maintainer" (default). The Admin
user is for Siemens personnel use only.
The default password is GCP5000 (case sensitive) to open the session. If security has not been
set to enable a maintainer password, the default will allow all regular user functions of the
WebUI to be accessed. If a specific maintainer password has been set, enter this. The default
GCP5000 may still be used to access the WebUI, but the user will be unable to change GCP
Programming parameters.

Figure 3-90 WebUI Login Screen

3-56
SIG-00-22-02 JUNE 2022 (Revised September 2022)
Version: B.1