Figure 4-12 Sscc 1 And 2 Configuration Menus - Siemens GCP5000 Instruction & Installation Manual

_________________________________________________________________________________________________________

Figure 4-12 SSCC 1 and 2 Configuration Menus

Rmt (Remote) Activation Cancel:
Specifies the maximum length of time that the crossing will remain active when activated
remotely via a command from the SEAR.
Range: 1 – 5 minutes. Default: 2 Min.
Bell On Gate Rising:
When set to Yes, the bell rings while the gates are rising.
Default: No
Mute Bell on Gate Down:
Specifies whether the bell outputs are turned off when all the gate down inputs (GDs) are
energized.
Default: No
4.11.2 Gate Down Inputs
Gate Down inputs (GDs) are used for various applications:
•
When the GDs are connected to the SSCC inputs, they are monitored by the SEAR
and can be used to generate alarm conditions and monitor crossing operations.
•
Can be used to control Preemption Gate Down Logic.
•
Can be used to control Traffic Control Clear Out Interval.
SIG-00-22-02
Version: B.1
SSCC APPLICATIONS & PROGRAMMING GUIDELINES
4-25
JUNE 2022 (Revised September 2022)