DISPLAY MODULE AND OFFICE CONFIGURATION EDITOR
_________________________________________________________________________________________________________
The following parameters are available for changing the granularity of logging messages. Value
1 is the lowest level of logging and should be used unless advised otherwise by Siemens for a
specific diagnostic purpose:
•
CP Log Verbosity : 1-2
•
VLP Log Verbosity : 1-5
•
Slot 2 Log Verbosity : 1-5
•
Slot 3 Log Verbosity : 1-5
•
Slot 4 Log Verbosity : 1-5
•
Slot 5 Log Verbosity : 1-5
•
Slot 6 Log Verbosity : 1-5
•
Slot 7 Log Verbosity : 1-5
•
SSCC IIIi-1 Log Verbosity : 1-5
•
SSCC IIIi-2 Log Verbosity : 1-5
Security Screen
The Security Screen enables the user to enable the password using the Security Enabled
setting which has the values None, Maintainer Only, Supervisor Only, or Maintenance or
Supervisor.
When a value is selected the user can enter the appropriate password.
SIG-00-22-02
Version: B.1
Figure 3-32 Security Screen
3-24
JUNE 2022 (Revised September 2022)