Figure 3-20 Internal States Screen; Figure 3-21 System States Screen - Siemens GCP5000 Instruction & Installation Manual

_________________________________________________________________________________________________________
3.1.2.3.4 Internal States Screen
The Internal States screen depicts the status of all internal logic currently set in the system. It
provides a list by Internal Logic number (1 – 16) stating Int.X:(Set by Parameter) Sets
(Parameter set by logic action) e.g., Int1:T3 Prime Sets T2 AND Enable.
3.1.2.3.5 System States Screen
The System States Screen depicts the status of all system-level states. Only states that are
currently used will be displayed.
SIG-00-22-02
Version: B.1
DISPLAY MODULE AND OFFICE CONFIGURATION EDITOR

Figure 3-20 Internal States Screen

Figure 3-21 System States Screen

3-15
JUNE 2022 (Revised September 2022)