Wiring Of An Ethernet Cable - Mitsubishi Electric NZ2GF2B-60TCTT4 User Manual

6.5

Wiring of an Ethernet Cable

(1) Connecting the Ethernet cable
(a) Connecting
CHAPTER 6 INSTALLATION AND WIRING
1.
Turn off the power supplies of the temperature
control module and the external device.
2.
Paying attention to the direction of the connector,
push the Ethernet cable connector into the
temperature control module until it clicks.
3.
Turn on the module power supply.
4.
Turn on the power supply of the external device.
5.
Check if the LINK LED on the port into which the
Ethernet cable is connected is on.
6
93