Mitsubishi Electric NZ2GF2B-60TCTT4 User Manual page 94

(4) Connecting and disconnecting the cable
To connect the cable, insert the wire with the cable fixing screw loosened and tighten the screw.
To disconnect the cable, pull out the wire with the cable fixing screw loosened with a flathead screwdriver.
(5) Processing method of the cable terminal
Strip the cable about 10mm from the top.
To use a bar solderless terminal, connect it to the stripped part.
(6) Lists of reference products of the bar solderless terminal
The following table lists the reference products of the bar solderless terminal.
Product
Bar solderless terminal
Tool dedicated for bar solderless
terminal
Bar solderless terminal
Tool dedicated for bar solderless
terminal
92
Model
TE 0.5-10
TE 0.75-10
TE 1.0-10
TE 1.5-10
NH79
AI 0.5-10WH
AI 0.75-10GY
AI 1-10RD
AI 1.5-10BK
CRIMPFOX6
Applicable wire size
2
0.5mm
2
0.75mm
2
0.9 to 1.0mm
2
1.25 to 1.5mm

2
0.5mm
2
0.75mm
2
1.0mm
2
1.5mm

Manufacturer
NICHIFU Co., ltd.
PHOENIX CONTACT GmbH & Co. KG