5.
Click the [Execute] button and the following window is displayed.
6.
Click the [Yes] button.
7.
The parameter is read from the temperature control module.
8.
Set "Method selection" to "Param write (Station parameter)".
9.
Set "Write Value". The following are the procedure.
• Click the title cell of "Initial Value" or "Read Value" to select all the items.
• Right-click on the items to copy them.
• Click the title cell of "Write Value" to select all the items.
• Right-click on the items to paste the copy.
CHAPTER 7 VARIOUS SETTINGS
111
7