Installation Environment And Installation Position; Installation Environment; Installation Position - Mitsubishi Electric NZ2GF2B-60TCTT4 User Manual

6.2

Installation Environment and Installation Position

6.2.1

Installation environment

(1) Installation location
Do not install the temperature control module to the place where:
• Ambient temperature is outside the range of 0 to 55;
• Ambient humidity is outside the range of 5 to 95%RH;
• Condensation occurs due to rapid temperature change;
• Corrosive gas or combustible gas is present;
• There is a large quantity of conductive powders such as dust and iron powders, oil mist, salts, or organic
solvents;
• The module is exposed to direct sunlight;
• A strong electric field or strong magnetic field is generated;
• The module is directly subject to vibration and shock.
(2) Installation surface
Install the temperature control module on a flat surface. If the installation surface is uneven, excessive force is
applied to the printed-circuit board, which may cause malfunction.
6.2.2

Installation position

When installing the temperature control module in a control panel, provide a distance of 60mm or longer away from the
surrounding structures and the adjacent modules to ensure good ventilation. Doing so also allows an easy module
replacement.
60mm
or longer
86
60mm
or longer
60mm
or longer
60mm
or longer
60mm
or longer
60mm
or longer
60mm
or longer