Remote I/O Interface - Mitsubishi Electric NZ2GF2B-60TCTT4 User Manual

3.4

Remote I/O Interface

The temperature control module has remote I/O signals (RX/RY), remote register (RWr/RWw), and remote buffer
memory as I/O Interfaces.
(1) Remote I/O signals (RX/RY)
With the cyclic transmission, a signal can be turned on or off without a program. Interlocks for writing parameter
for control arranged in remote buffer memory areas and signals that indicate the operating status of the
temperature control module are arranged.
(2) Remote register (RWr/RWw)
With the cyclic transmission, data can be read or written without a program.
• Rwr: Monitoring data that indicates the operating status of the temperature control module is arranged.
• RWw: Parameter for control which can be written immediately is arranged.
(3) Remote buffer memory
Module parameter and parameter for control which can be written with both the CPU module and temperature
control module are arranged. To receive data, use the REMFR or REMTO instruction.
Programming is reduced since the parameter can be configured on the window with the CC IE Field configuration
of GX Works2.
•Remote register
•Remote I/O signal
REMTO instruction or CC IE Field
CPU
configuration window of GX Works2
module
Remote buffer memory
REMFR instruction or CC IE Field
configuration window of GX Works2
CHAPTER 3 SPECIFICATIONS
Temperature
control
module
3
41