Table of Contents
Advertisement
5
INSTALLATION AND WIRING
This chapter describes the installation and wiring of the IO-Link module.
5.1
Installation Environment and Installation Position
Installation environment
Installation location
Do not install the IO-Link module to the place under the following condition.
For UL listed products, ensure that the ambient temperature and input voltage satisfy the specifications.
• Ambient temperature is outside the range of 0 to 55 (0 to 40 for UL listed products);
• IP67 is not satisfied;
• Condensation occurs due to rapid temperature change;
• Corrosive gas or combustible gas is present;
• Conductive powder such as dust and iron powder, oil mist, salinity, or organic solvent is filled;
• The IO-Link module is exposed to direct sunlight;
• A strong electric field or strong magnetic field is generated; and
• The IO-Link module is subject to vibration and shock.
Installation surface
Install the IO-Link module on the flat surface. When the installation surface is uneven, excessive force is applied to the IO-Link
module and may cause a defect.
5 INSTALLATION AND WIRING
5.1 Installation Environment and Installation Position
5
33
Advertisement
Table of Contents
Troubleshooting
