Adjustment Of Printer Settings - GE Voluson E Series Service Manual

Setup Instructions

3.6.5 Adjustment of Printer Settings

After system restart:
1. Press the Utilities key on the control console.
2. In the "Utilities" menu touch the
3. On the right side of the screen select
4. Select the desired printer from the Printer Settings pull-down menu and click the
•
"UP-D897 / UP-D898MD Printer - Settings" on page 3-38
•
"UP-D25MD Printer Settings" on page 3-39
Warning
After each installation, the leakage currents have to be measured according to IEC 60601-1, IEC 62353 or
other relevant standard.
3.6.5.1 UP-D897 / UP-D898MD Printer - Settings
1. Call up the "Printer Preferences"; see
2. Select the
-
Paper: 960x1280
-
Orientation: Portrait
-
Interpolation Method: Bilinear
3. Select the
-
Gamma: TONE2
-
Advanced = 0, Dark = 0, Light = 0, Sharpness = 2
4. Save the adjusted printer settings with
5. Assign the printer to the remote keys P1, P2, P3, P4, P5 and/or P6; see
Selection" on page 3-41
3-38
Setup button to invoke the setup desktop on the screen.
Figure 3-29 select desired printer
Layout page and select:
Figure 3-30 Layout / Density Adjust page
Density Adjust page and select:
.
Connectivity and then click the Peripherals tab.
Section 3.6.5 "Adjustment of Printer Settings" on page 3-38
Apply and OK . Close window and exit System Setup.
Edit button.
.
Section 3.6.6 "Remote Control
Voluson E-Series Service Manual
5539550APB Revision 6