Tcp/Ip Configuration - GE Voluson E Series Service Manual

Setup Instructions

3.13.1 TCP/IP Configuration

Following information must be provided by the customer or hospital engineer before you can start: Station
Note
name, AE Title, IP address and Port Number for the Voluson E-Series. The IP addresses for the default
gateway and other routers at the site for ROUTING INFORMATION. Only if necessary (e.g. for Internet
access).
1. Press the Utilities key on the control console.
2. In the "Utilities" menu touch the
3. On the right side of the screen select
4. Click the button, read the message and confirm with
5. The "Internet Protocol (TCP/IP) Properties" dialog page appears.
This example shows fictional numbers!
Note
1 You can get IP and DNS settings assigned automatically, if your network supports this capability.
2 If fixed IP address is required, ask your network administrator for the appropriate settings.
Type in:
-
-
-
-
For further details refer to the Voluson E-Series Basic User Manual.
Note
3-58
Setup button to invoke the setup desktop on the screen.
Figure 3-45 Internet Protocol (TCP/IP)
IP address
Subnet mask
Default gateway
DNS server
Connectivity and then click the Device Setup tab.
Yes .
Figure 3-44 Configuration
Voluson E-Series Service Manual
5539550APB Revision 6