How To Change Video Norm; How To Change Ext. Monitor Output Settings; How To Adjust Function Of The Footswitch; How To Change The Keyboard Layout - GE Voluson E Series Service Manual

3.7.1.6 How to change Video Norm

1. Invoke System Setup as described in
2. On the right side of the screen select
3. Click the proper field: PAL (50Hz) or NTSC (60Hz); see
4. Close the Service page with

3.7.1.7 How to change Ext. Monitor Output Settings

1. Invoke System Setup as described in
2. On the right side of the screen select
3. If not currently selected, click the proper field; see
4. Close the Service page with

3.7.1.8 How to adjust function of the Footswitch

1. Invoke System Setup as described in
2. On the right side of the screen select
3. Select desired function of the Footswitch. Refer to
4. Close the Service page with

3.7.1.9 How to change the Keyboard Layout

Section 6.4 "Modification of Keyboard Layout" on page 6-5
see

3.7.1.10 How to configure InSite

see Section 3.13.8 "InSite Configuration" on page 3-70

3.7.1.11 How to execute Additional Software Installation (ASI)

1. Invoke System Setup as described in
2. On the right side of the screen select
3. Enter the password « she » and click
Entering a password is no more required at systems with software version EC330 (BT18).
4. Click the
The software parts to be installed depend on the contents of the System DVD that is used.
Voluson E-Series Service Manual
5539550APB Revision 6
Save&Exit and restart the system.
Save&Exit and restart the system.
Save&Exit and restart the system.
ASI button.
Section 3.7.1.1 on page 3-43
Connectivity and then click the Peripherals tab.
Figure 3-28 on page 3-37
Section 3.7.1.1 on page 3-43
Connectivity and then click the Peripherals tab.
Figure 3-28 on page 3-37
Section 3.7.1.1 on page 3-43
Connectivity and then click the Peripherals tab.
Figure 3-28 on page 3-37
Section 3.7.1.1 on page 3-43
Administration and then click the Service tab.
Accept .
Setup Instructions
.
.
.
.
.
.
.
3-45