Printer Installation; Installing The Digital Black & White Printer; Installing The Digital Color Printer; Installing The Deskjet Color Printer Directly Via An Usb-Cable - GE Voluson E Series Service Manual

Setup Instructions

3.6 Printer Installation

For connection schemes see
Note
Content in this section
3.6.1 Installing the Digital Black & White Printer - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-36

3.6.2 Installing the Digital Color Printer - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-36

3.6.3 Installing the DeskJet Color Printer directly via an USB-cable - - - - - - - - - - - - - - - 3-36

3.6.4 Printer Installation manually - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-37
3.6.5 Adjustment of Printer Settings - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-38
3.6.6 Remote Control Selection - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-41
The Network Color Laser printer and the Bluetooth printer connection set MUST NOT be installed by the
Note
user! For installation please contact your local distributor or GE service representative.
If a DeskJet printer (e.g., HP Officejet 100) is connected directly via an USB-cable, use the AC mains power
outlet provided by the Voluson E-Series system (auxiliary output). This ensures medical grade separation
from AC mains.
Warning
After each installation, the leakage currents have to be measured according to IEC 60601-1, IEC 62353 or
other relevant standard.
EC330 (BT18) only:
If the Whitelisting option is available and activated in System Setup - Administration , a password login
window might appear during the installation procedure.
3.6.1 Installing the Digital Black & White Printer
1. Power Off/Shutdown the system as described in
2. Connect and install the printer as described in
3. Verify correct printer settings; see
4. Assign the printer to the remote keys P1, P2, P3, P4, P5 and/or P6; see
Selection" on page 3-41
3.6.2 Installing the Digital Color Printer
1. Power Off/Shutdown the system as described in
2. Connect and install the printer as described in
3. Verify correct printer settings; see
4. Assign the printer to the remote keys P1, P2, P3, P4, P5 and/or P6; see
Selection" on page 3-41
3.6.3 Installing the DeskJet Color Printer directly via an USB-cable
1. Power Off/Shutdown the system as described in
2. Connect the printer according to connection scheme
3. When all cables are connected, press the Power ON button on the printer.
4. Power ON/Boot up the Voluson E-Series system as described in
All software drivers are pre-installed for the designated printer only.
5. After physical connection to the Voluson E-Series system, assign the printer to a remote key (P1, P2,
P3, P4, P5 and/or P6) as described in
6. Verify correct printer settings; see
7. Assign the printer as Report Printer, see
3-36
Section 3.5 "Connection of Auxiliary Devices" on page 3-14
Section 4.2.2 on page 4-4
Section 3.5.3 on page 3-17
Section 3.6.5 "Adjustment of Printer Settings" on page 3-38
.
Section 4.2.2 on page 4-4
Section 3.5.4 on page 3-19
Section 3.6.5 "Adjustment of Printer Settings" on page 3-38
.
Section 4.2.2 on page 4-4
Section 3.6.6 "Remote Control Selection" on page 3-41
Section 3.6.5 "Adjustment of Printer Settings" on page 3-38
Section 3.6.6.1 "Report Printer Selection" on page 3-41
.
.
Section 3.6.6 "Remote Control
.
.
Section 3.6.6 "Remote Control
.
Figure 3-17 on page 3-25
.
Section 3.4.1 on page 3-9
Voluson E-Series Service Manual
.
.
.
.
.
.
.
5539550APB Revision 6