GE Voluson E Series Service Manual page 260

Replacement Procedures
8.8.3.3 Replacement of the Printer Flap
Manpower
One person, 1 minute
Tools
Phillips screwdriver PH1 and PH2
Preparations
1. Power Off/Shutdown the system as described in
8.8.3.3.1 Printer Flap - Removal Procedure
1. Open the Side Cover Doors on both sides of the system.
2. Use a screwdriver and press the hinges inside.
3. Pull out the Printer Flap (A).
8.8.3.3.2 Printer Flap - Installation Procedure
1. Place the (new) Printer Flap on its original position.
Make sure to hear the hinges snap.
Note
8-20
Section 4.2.2 on page 4-4
Figure 8-24 press the hinges inside with a screwdriver
.
Voluson E-Series Service Manual
5539550APB Revision 6