Wireless Network Configuration - GE Voluson E Series Service Manual

3.13.2 Wireless Network Configuration

To configure the Voluson E-Series system to work with WLAN, the hospital's network administrator has to
Note
provide the required information.
Content in this section
3.13.2.1 Connecting to the WLAN - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-59
3.13.2.2 Disconnecting from the WLAN - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-59
3.13.2.3 Adding a WLAN Profile - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-60
3.13.2.4 Refreshing a WLAN Network - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-60
3.13.2.5 Setting a WLAN Network as Non-Preferable - - - - - - - - - - - - - - - - - - - - - - - - - 3-60
3.13.2.6 Removing a WLAN Profile - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-61
3.13.2.7 Customizing an existing WLAN Profile - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-61
3.13.2.8 Available WLAN Channels - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-62
3.13.2.9 Monitoring the WLAN - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-62
3.13.2.10 WLAN Diagnostic - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-63
3.13.2.11 Repairing the WLAN - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-63
3.13.2.1 Connecting to the WLAN
1. Connect the Wireless Network adapter as described in
2. Press the Utilities key on the control console.
3. In the "Utilities" menu touch the
4. On the right side of the screen select
5. Click the
6. The Wireless Network Configuration tool with available Wireless Networks appear.
7. Check box "Enable Wireless Connection".
8. Highlight the wireless network you want to use and then click
If the WLAN fails to connect, review and/or recreate the Wireless connection in the Security tab.
Note
3.13.2.2 Disconnecting from the WLAN
1. Press the Utilities key on the control console.
2. On the right side of the screen select
3. Click the
4. The Wireless Network Configuration tool with available Wireless Networks appear.
5. Select the WLAN you are connected to and then click
Voluson E-Series Service Manual
5539550APB Revision 6
Setup button to invoke the setup desktop on the screen.
WLAN Configuration button; see
Figure 3-46 Wireless Networks - Connect
WLAN Configuration button; see
Section 3.5.8 on page 3-28
Connectivity and then click the Device Setup tab.
Figure 3-44 on page 3-58
Connect .
Connectivity and then click the Device Setup tab.
Figure 3-44 on page 3-58
Disconnect .
Setup Instructions
.
.
.
3-59