Replacement Of The Caps For Encoders And/Or Joycoders; Caps For Encoders And/Or Joycoders - Replacement Procedure - GE Voluson E Series Service Manual

8.14 Replacement of the Caps for Encoders and/or Joycoders

Manpower
One person, 10 minutes
Tools
none (poss. small-sized slotted screwdriver or tweezers)

8.14.1 Caps for Encoders and/or Joycoders - Replacement Procedure

1. Remove the caps for Encoders and/or Joycoders.
Do not loose integrated metal spring in each cap.
Note
2. Mount the caps for Encoders and/or Joycoders.
Voluson E-Series Service Manual
5539550APB Revision 6
Figure 8-31 remove caps
Replacement Procedures
8-25