Map Network Drive - GE Voluson E Series Service Manual

3.13.7 Map Network Drive

1. Press the Utilities key on the control console.
2. In the "Utilities" menu touch the
3. On the right side of the screen select
4. Click the
network drive of another server.
5. Enter the name of the shared network folder in the „Network Folder Name" field.
6. Supply a valid user name and a password for this folder.
If you check the „Automatic Reconnect" box, the system tries to establish the connection again when starting
Note
up. Otherwise, the connection must be re-established manually after a shutdown or reboot.
7. Select the
Disconnect button becomes active.
Note The Map Network Drive button is also accessible in the "Connect USB and Network Drives" dialog window
that appears when pressing the Eject key on the alphanumeric keyboard.
If there is an error during the connection, a warning message appears inside the dialog. In this case, please
Note
verify the data in the dialog.
If there already is a connection to the remote server, the Connect button is grayed. To change the existing
Note
connection, first click on Disconnect and then enter the new settings.
Warning
Please make sure that the server you are connecting to is trustworthy and reliable. For details, contact your
local system administrator.
If you backup archive data to this server, all the patients demographic data will be copied to this server!
Voluson E-Series Service Manual
5539550APB Revision 6
Setup button to invoke the setup desktop on the screen.
Figure 3-57 Setup - Connectivity - DRIVES page
Map Network Drive button to open a dialog where the system can be connected to a shared
Figure 3-58 Map Network Drive
Connect button to establish the connection to the remote system. If successful, the
Connectivity and then click the Drives tab.
Setup Instructions
3-69