GE Voluson E Series Service Manual page 252

Replacement Procedures
12. Updating will take some time ....
First the image is saved to R:\ (
Restoring NTFS from image .... ).
(
13. Please wait until all processes are finished (100 percent completed).
14. The system is rebooting into windows (Boot screen - Voluson).
An automated process was developed to install the required software parts, perform check disk, remap drive
Note
letters and match settings. During this process the system might reboot several times!
15. Please wait until all processes are finished.
8-12
Saving NTSF to image .... ); then the image is restored from R:\
Figure 8-16 Please wait ...
Figure 8-17 automatic processes are running
Voluson E-Series Service Manual
5539550APB Revision 6