Using The Oven Controls; Ovencontrol,Clockand Timerfeaturesand Settings - GE EGR3000 Owner's Manual

Table of Contents

Advertisement

ul
"o
"0
rn
up
v
vm
rm%
.
A
o
0
E
0
Using the oven controls.
Throughout this manual, features and appearance may vary from your model.
en Contrails
;3
[. On
J
Temp Recsll
0
Y
Coot:s
_.._TimerJ_,.__ . .... _J
On / Off
_-Oven_
J_-O°:
' ng_ Jr-St_
rt-_J
U
3LT m9
lO
OvenControl,Clockand TimerFeaturesand Settings
(onsomemodels)
o
ake/Temp Recall Pad
O
Touch this pad to select the bake function.
Bake Light
Flasheswhile in edit mode-sou can change
the oventemperature at this point. Glows when
the oven is in bake mode.
O
Start/On Pad
Must be touched to start any cooking or cleaning
function.
O
ispla_l
Shows the time of dag, oven temperature,
whether the oven is in the bake, broil or
self-cleaning mode and the times set for
the timer or automatic oven operations.
The displag will show PREwhile preheating.
When the oven reaches the selected
temperature, the oven control will beep and
the displag will show the oven temperature.
If'F-" and a number or letter flash in the displaF
and the oven contro! signals,this indicates a function
error code.
If blOUr o ven was set for a timed oven operation
and a power outage occurred, the clock and a!!
programmed functions must be reset.
Thetime of daF wi!! flash in the displaF when there
has been a power outage. Resetthe clock.
If the function error code appears during the
self-cleaning cFde, checkthe oven door latch. The
latch handle mablhave been moved, even if on!F
slightltj, from the latched position. Make sure the
latch is moved to the right as far as it wi!! go.
Touch the Cleur/Off pud. Allow the oven to coo!
for one hour. Put the oven back into operation.
If the function error code repeats, disconnect
the power to the range and ca!!for service.
0
0
0
Kitchen Timer On/Off Pad
Touch this pad to select the timer feature.
Then press the + and - pads to adjust the timer.
Timer Light
Flasheswhile in edit mode-sou can change
the set time at this point. Glowswhen the timer
has been activated. Flashesagain when the time
has run out until the control is reset.
Clock Pad
To set the clock, press this pad twice and then
press the + and - pads. The time of dag will
flash in the displag when the oven is first
turned on.
Start Time Pad (on some models)
Use along with the Cooking Time or Self Cleon
pads to set the oven to start and stop
automaticallg at a time Sou set.
Start Time Light
Flasheswhile in edit mode-sou can change
the start time at this point. Glowswhen the
function has been activated.
Cooking Time Pad (on some models)
Touch this pad and then touch the + or - pads
to set the amount of time Sou want sour food
to cook. The oven will shut off when the cooking
time has run out.
Cooking Time Light
Flasheswhile in edit mode-sou can change
the set time at this point. Glowswhen the
function has been activated. Flashesagain when
the time has run out until the control is reset.

Advertisement

Table of Contents
loading

Table of Contents