How To Setup E-Mail To Mms Service - GE Voluson E Series Service Manual

3.13.5 How to Setup E-mail to MMS Service

If the Voluson E-Series is connected to the Internet (via LAN, Wi-Fi or Cellular modem) and E-mail service is
configured properly, it is possible to send images as an MMS.
MMS are sent by e-mail to a 3rd party provider (e.g. SMSglobal). This service needs to be ordered by a 3rd
Note
party provider.
Registration of MMS Service
To use the MMS feature you need to contract with a 3rd party provider which offers E-mail to MMS service
(e.g. SMSglobal). Please contact the service provider!
How this feature works
Voluson E-Series sends an E-mail with an attached image to the E-mail to MMS service. The MMS phone
number is encapsulated in the recipient E-mail address
MMS Options
1. Press the Utilities key on the control console.
2. In the "Utilities" menu touch the
3. On the right side of the screen select
4. Click the
5. In the Email Configuration screen check box "
The Email to MMS Service Settings window appear.
Note The configuration above works with SMSglobal.
6. Enter the Domain Name from 3rd party E-mail to MMS service.
Note: An E-mail to phone number@Domain Name for MMS Email is sent!
7. Store your configuration with click on
8. Individually enter Patient's Email address and Phone number in the PID screen and adjust Email
and/or MMS options as described in
Voluson E-Series Service Manual
5539550APB Revision 6
Setup button to invoke the setup desktop on the screen.
Email Configuration button; see
Figure 3-54 check box
Figure 3-55 Email to MMS Service Settings
Connectivity and then click the Device Setup tab.
Figure 3-44 on page 3-58
Use Email to MMS Service " and then click on Settings .
OK .
Section 3.13.6 on page 3-68
Setup Instructions
.
.
3-67