Screen Captures And Logs; Capturing A Screen - GE Voluson E Series Service Manual

7.4 Screen Captures and Logs

There may be times when the customer or field engineer will want to capture a presentation on the screen so
it may be recovered by the OnLine Center. This is accomplished by saving the image(s):
1. to archive and export them (as jpg, bmp or tiff) to DVD/CD or external USB drive
2. as jpg and bmp to D:\export by pressing the Alt + P key on the alphanumeric keyboard
Note: Successive Alt + P keystrokes (max. 20) overwrite existing snapshots at destination HDD!
3. creates one snapshot (Alt-D.bmp) + "Full Backup" of the System state (fullbackup -> fb1) saved on D:
\export by pressing the Alt + D key on the alpha-numeric keyboard

7.4.1 Capturing a Screen

The following is the generic process to capture any screen from the Voluson E-Series system.
1. Navigate to, and display the image/screen/volume to be captured.
2. Press the P1, P2, P3, P4, P5 or P6 key (depending on system configuration) on the control console
and store the image onto the clipboard (frame on left side of the screen).
A short summary of P1, P2, P3, P4, P5 or P6 keys configuration is shown in the status area on the screen.
Note
3. Select the stored image(s) and export them to DVD drive, an external USB drive (optional) or mapped
Network drive (jpg, bmp, tiff or Volume file).
Voluson E-Series Service Manual
5539550APB Revision 6
Figure 7-8 summary of keys configuration
Diagnostics/Troubleshooting
7-9