GE Voluson E Series Service Manual page 84

Setup Instructions
5. Lightness : Sharpness = 7, Dark = 0, Gamma = -6, Light = 2, Gamma Curve = Curve 1
Color Correction : check mark Printer Hardware Color Correction
6.
Gray Balance : X = 50, Y = 50
7.
Adjustment by Color : Color (region) = Magenta Red
8.
9. Save the adjusted printer settings with
10. Assign the printer to the remote keys P1, P2, P3, P4, P5 and/or P6; see
Selection" on page 3-41
3-40
Figure 3-32 Graphic page (Lightness / Color Correction)
Figure 3-33 Graphic page (Gray Balance / Adjustment by Color)
Apply and OK . Close window and exit System Setup.
.
Section 3.6.6 "Remote Control
Voluson E-Series Service Manual
5539550APB Revision 6