Table of Contents
Advertisement
Administrator's Guide
Note:
Regardless of policy configuration, the client will be able to access and configure the printer.
Configuring a Certificate for IPsec/IP Filtering
Configure the Client Certificate for IPsec/IP Filtering. When you set it, you can use the certificate as an
authentication method for IPsec/IP Filtering. If you want to configure the certification authority, go to CA
Certificate.
1. Access Web Config and then select the Network Security tab > IPsec/IP Filtering > Client Certificate.
2. Import the certificate in Client Certificate.
If you have already imported a certificate published by a Certification Authority, you can copy the certificate
and use it in IPsec/IP Filtering. To copy, select the certificate from Copy From, and then click Copy.
Related Information
"Accessing Web Config" on page 23
&
"Logging on to the Printer Using Web Config" on page 35
&
"Obtaining a CA-signed Certificate" on page 64
&
Connecting the Printer to an IEEE802.1X Network
Configuring an IEEE802.1X Network
When you set IEEE802.1X to the printer, you can use it on the network connected to a RADIUS server, a LAN
switch with authentication function, or an access point.
1. Access Web Config and then select the Network Security tab > IEEE802.1X > Basic.
2. Enter a value for each item.
If you want to use the printer on a Wi-Fi network, click Wi-Fi Setup and select or enter an SSID.
Note:
You can share settings between Ethernet and Wi-Fi.
3. Click Next.
A confirmation message is displayed.
4. Click OK.
The printer is updated.
Related Information
"Accessing Web Config" on page 23
&
"Logging on to the Printer Using Web Config" on page 35
&
"IEEE802.1X Network Setting Items" on page 85
&
Advanced Security Settings for Enterprise
84
Advertisement
Table of Contents
