Encrypted Communication Using Ipsec/Ip; Filtering - Epson ES-C320W User Manual

Administrator Information
2. Select a value for each item.
❏ Encryption Strength
Select the level of encryption strength.
❏ Redirect HTTP to HTTPS
Redirect to HTTPS when HTTP is accessed.
3. Click Next.
A confirmation message is displayed.
4. Click OK.
The scanner is updated.
Related Information
"How to Run Web Config in a Web Browser" on page 30
&
Configuring a Server Certificate for the Scanner
1. Access Web Config and select the Network Security tab > SSL/TLS > Certificate.
2. Specify a certificate to use on Server Certificate.
❏ Self-signed Certificate
A self-signed certificate has been generated by the scanner. If you do not obtain a CA-signed certificate,
select this.
❏ CA-signed Certificate
If you obtain and import a CA-signed certificate in advance, you can specify this.
3. Click Next.
A confirmation message is displayed.
4. Click OK.
The scanner is updated.
Related Information
"How to Run Web Config in a Web Browser" on page 30
&
Encrypted Communication Using IPsec/IP Filtering
About IPsec/IP Filtering
You can filter traffic based on IP addresses, services, and port by using IPsec/IP Filtering function. By combining of
the filtering, you can configure the scanner to accept or block specified clients and specified data. Additionally, you
can improve security level by using an IPsec.
>
Advanced Security Settings
187
>
Encrypted Communication Using IPsec/IP Filtering