Menu Options For Network Settings - Epson ET-4700 Series User Manual

User's Guide
Country/Region:
Select the country or region in which you are using your printer. If you change the country or region,
your fax settings return to their defaults and you must select them again.
Language:
Select the language used on the LCD screen.
Sleep Timer:
Adjust the time period to enter a sleep mode (energy saving mode) when the printer has not
performed any operations. The LCD screen turns black when the setting time passes.
PC Connection via USB:
Select Enable to allow a computer to access the printer when connected by USB. When Disable is
selected, printing and scanning that is not sent over a network connection is restricted.
Related Information
"Saving Power - Control Panel" on page 65
&

Menu Options for Network Settings

Select the menus on the control panel as described below.
Settings > Network Settings
Print Status Sheet
Prints a network status sheet.
Wi-Fi Setup:
Set up or change wireless network settings. Choose the connection method from following and then
follow the instructions on the control panel.
❏ Wi-Fi (Recommended):
❏ Wi-Fi Direct
Connection Check
Checks the status of the network connection and prints the network connection report. If there are any
problems with the connection, see the check report to solve the problem.
Related Information
"Making Wi-Fi Settings by Entering the SSID and Password" on page 32
&
"Making Wi-Fi Settings by Push Button Setup" on page 33
&
"Making Wi-Fi Settings by PIN Code Setup (WPS)" on page 34
&
"Wi-Fi Direct (Simple AP) Connection" on page 21
&
"Printing a Network Status Sheet" on page 41
&
"Checking the Network Connection Status" on page 34
&
Preparing the Printer
61