Menu Options For Network Settings; Menu Options For Epson Connect Services - Epson WorkForce WF-2840 Series User Manual

Preparing the Printer
PC Connection via USB:
Select Enable to allow a computer to access the printer when connected by USB. When Disable is
selected, printing and scanning that is not sent over a network connection is restricted.
Related Information
"Saving Power - Control Panel" on page 66
&
"Entering Characters" on page 18
&

Menu Options for Network Settings

Select the menus on the control panel as described below.
Settings > Network Settings
Print Status Sheet:
Prints a network status sheet.
Wi-Fi Setup:
Set up or change wireless network settings. Choose the connection method from following and then
follow the instructions on the control panel.
❏ Wi-Fi (Recommended)
❏ Wi-Fi Direct
Connection Check:
Checks the status of the network connection and prints the network connection report. If there are any
problems with the connection, see the check report to solve the problem.
Related Information
"Making Wi-Fi Settings by Entering the SSID and Password" on page 31
&
"Making Wi-Fi Settings by Push Button Setup" on page 32
&
"Making Wi-Fi Settings by PIN Code Setup (WPS)" on page 33
&
"Wi-Fi Direct (Simple AP) Connection" on page 20
&
"Printing a Network Status Sheet" on page 40
&
"Checking the Network Connection Status" on page 34
&

Menu Options for Epson Connect Services

Select the menus on the control panel as described below.
Settings > Epson Connect Services
Register/Delete:
Register or delete the printer to or from the Epson Connect services.
For usage guides, see the following portal website.
>
Menu Options for Settings
>
Menu Options for Epson Connect Services
62