Cleaning Transport Sensors - Kodak Ngenuity 9090DB Operator's Manual

C
AUTION
If using forced air to clean the sensors, do NOT turn the can of forced air upside down or tip it
sideways more than 40 degrees while using. The extension tube can be bent so as to avoid
having to tip the can.
To clean the feeder sensor, perform the following:
1. Power OFF the scanner (see 1.4.2 Scanner Back,
2. Using the supplied blower brush, squeeze the blower brush to push short bursts of air into the
opening for the feeder sensor. At the same time, sweep the brush end down into the opening
of and across the feeder the sensor
3. When finished, open the transport cover (see 1.4.1 Scanner Front,
page 7 and "Transport Cover Release Levers" on page 7)
4. Clean all the items in the scanner's Optics group (glass flats, cameras' glass covers, sensors)
5. Close the scanner's transport cover
6. Once all the items that make up the scanner's
Optics have been cleaned, reset the Optics main-
tenance reminder in the NOU
- With the NOU active and communicating with
the scanner (see
Utility" on page
hyperlink associated with "Clean Optics" in the
Maintenance monitor of the Home screen
- A confirmation dialog window will display.
Confirm the Optics have been cleaned by
clicking the YES button. This will reset the
reminder to begin monitoring for future,
required maintenance
The transport sensors consist of the gap (1), page entry (3), pass thru (1), and exit (1) sensors.
To view these sensors, open the scanner's transport cover. All of the transport sensors are
located in the scanner's top or front page assembly. With the exception of the exit sensor, all the
transport sensors can be viewed by standing in front of the scanner.
To view the exit sensor, move to the right side of the scanner so as to view the very back of the
front transport tray (due to the shape/bend of the front transport tray, the exit sensor actually faces
the back of the scanner).
76
"2.2 Ngenuity Operator
29), click on the Clean
"Power Switch" on page
"Transport Cover" on
and clean the remaining sensors
C T
LEANING RANSPORT
11)
S
ENSORS
S008769 Rev A