Unpacking/Repacking - Kodak Ngenuity 9090DB Operator's Manual

Ref# Item Name
6 Power
Connector
7 Fan
8 Foot
9 Intake Vent
Before completely unpacking your scanner, inspect the shipping cartons and their contents for
any signs of damage. If there is damage, notify the freight carrier immediately to file a damage
claim.
Save all of the shipping cartons and packaging materials that come with your Ngenuity scanner.
If it is ever necessary to move or ship the unit or any of its accessories, pack them in their original
cartons.
Scanners and/or accessories must be returned in the original packing carton and inserts.
BÖWE BELL + HOWELL and the carrier will not accept responsibility for damages incurred
during shipping if the scanner is returned in anything but the original carton and
packaging material.
If you need to return the scanner and do not have the original packaging material, a packaging kit
can be provided to you. Contact the BBH Sales at 1-800-SCAN-494 for more details (charges
may apply).
W
ARNING
The scanner weighs approximately 112 pounds (51 kg). Be sure to incorporate the appropriate
manpower (taking into consideration your lifting capabilities) before moving or lifting the
scanner.
12
Connector for supplied power cable.
Fan for cooling the scanner. The fan is part of the scanner's power supply.
Make sure to properly vent the scanner for optimal performance (see
"1.3 Operating Environment" on page 3
Rubber appendage that the scanner sits on and allows for clearance below
the scanner. There are four total; 2 on either side.
The vent that the power supply's fan uses to draw air in for cooling. It is
important that the scanner not be positioned in such a way that the intake
vent is blocked in any way.
C
AUTION
Make sure to maintain an additional 4-5" (10-13 cm) of additional
clearance at the front, back, and both sides of the scanner for
proper ventilation.

1.5 Unpacking/Repacking

Description
for more details).
S008769 Rev A