Advanced Settings Button; Border Adjust; Save And Restore Buttons - Kodak Ngenuity 9090DB Operator's Manual

The current or active volume and error sound selection can be heard by clicking on the Play
Sound button.

2.2.3.5 Advanced Settings Button

Clicking the Advanced button in the Settings screen of
the NOU opens a separate Advanced Settings window,
from which the Operator can set and manipulate the
Border Adjust control.
B A
ORDER DJUST
The image boundaries or borders of a scanned image
which are determined by the autocrop process can be
modified with the controls found in the Border Adjust
tab of the Advanced Settings window.
Borders on a scanned image can be individually
adjusted, either by further cropping or by adding extra
black border.
The range of adjustment is between -0.500 to 0.500
inches; negative values crop, and positive values add
extra border. The default values are 0.000 for all
sides (the graphic image illustrates whether cropping
or extra black border will be applied to each page edge. The displayed crop or border is
approximate only; the entered values will be accurately applied to the scanned image).
Clicking the Save button saves any changes made and clicking the Cancel button cancels or
doesn't save any changes made (values revert back to the previously saved settings and the
Advanced Settings window closes).

2.2.3.6 Save and Restore Buttons

If changes are made to any of the settings found in the
Settings screen of the NOU, the Operator must either
save the changes (click the Save button) or restore the
previously saved settings (click the Restore button).
If changes are made and the Operator attempts to navigate out of the Settings screen, a prompt
dialog is displayed asking to either Save or Restore the settings.
S008769 Rev A 39