Maintenance Screen; Scanner Stats - Kodak Ngenuity 9090DB Operator's Manual

N
OTE
Be aware that the NOU's controls remain accessible, but are not functional after connectivity
with the scanner has been established and then the scanner is powered OFF or the USB cable
is disconnected. Any changes made to existing settings with the scanner powered OFF will
not be present at next power ON.
If the scanner is powered OFF and the NOU application closed, the scanner must be powered
ON in order to reestablish connectivity to the NOU.
Clicking the Maintenance button found in the
NOU displays the Maintenance screen.
The Maintenance screen contains the
scanner statistics (counters) for total hours
on, total pages fed and total pages scanned.
The Maintenance screen also allows the
Operator to configure reminders for the
different maintenance tasks that are required
to ensure optimal scanner performance.
The Scanner Stats section of the Maintenance screen
displays scanner statistics for Total On Time (awake and
sleeping), Total Pages (fed), and Scanned Pages.
There is no Operator input or change control available for the Scanner Stats. The values are
automatically updated upon every entry to this screen, and while in the screen they are updated
every 30 seconds so that they are reasonably current.
The numbers displayed will not update at every page increment if feeding or scanning is in
progress.
40

2.2.4 Maintenance Screen

2.2.4.1 Scanner Stats

S008769 Rev A