Cleaning The Paper Sensor, Waiting Sensors And Double Feed Detector - Kodak truper 3600 Operator Maintenance

Cleaning the Paper Sensor, Waiting Sensors and Double Feed Detector

Preparation: Locate the blower accessory and remove the brush from the blower.
Press the power button to the OFF position.
1
Push the ADF door release button to open the ADF door.
2
Use the blower accessory to blow off any dirt from the surface of the paper sensor and waiting
3
sensor. Also, blow off any dirt from the surface of the metal reflector sheet used by the waiting
sensor.
Blower accessory
Blower
Sensor or detector
www.bbhscanners.com
Waiting sensor
Reflector sheet for
waiting sensor
Paper sensor
83 of 142