The scanner's control panel and the Ngenuity Operator Utility are detailed in this section.
The control panel is located on the front of the scanner (see
"1.4.1 Scanner Front" on page
switches, LED indicators, universal graphics (pictogram legends),
and text legends that allow the Operator to manipulate basic
scanner controls.
Through the use of the LED indicators and audible tones (see
"2.2.3.4 Audio" on page
notification device for the Operator as to the current state of the
scanner (e.g. power state, maintenance needed, active features,
errors, etc.). It is divided into five sections:
•
Status
•
Feeder Table
•
Custom Functions
•
Scan Monitor
•
Batch Control
Some of the functionality contained within these sections
correlates with the settings and information found in the Ngenuity
Operator Utility, which is discussed in greater detail in
"2.2 Ngenuity Operator Utility" on page
N
OTE
The control panel remains powered during SLEEP mode;
however, it will be un-powered during the OFF mode, i.e.,
powered OFF (see
more information).
S008769 Rev A
Operating Your Scanner
6). It is comprised of pushbutton
38), the control panel also acts as a
29.
"2.1.1.1 Power Mode LED" on page 18
2.1 Control Panel
for
17